DMLS : Additive Metal Manufacturing MaterialsList

EOS machine Since 2003, Morris Technologies, Inc. has been known for our extensive capabilities utilizing direct metal laser sintering (DMLS) to produce complex geometries. The process uses a high-power laser and scanner system to fuse fine metal powder, layer by layer, to create fully dense parts. With the proper thermal treatments, these "grown" components exhibit near wrought properties.

Click the video links below for more information on the DMLS process.

^Videos:

DMLS in Action MTI at Rapid

Benefits of the technology

Design freedoms: internal geometry, conformal cooling passages and lattice structures
Time savings: from CAD to complex parts in days not months
Cost savings: fully functional parts produced without tooling
Material properties: 99.5% dense super alloys with near wrought properties

Standard materials include:

Materials in development:

Hastelloy - X
Copper Alloy

*Morris Technologies is continually
developing new materials. If you
are interested in others not listed
here, please contact our Director
of New Technologies to discuss
opportunities.

Parameter development

Morris Technologies' DMLS services can create custom process parameters to run other metal powders. Contact MTI to discuss desired materials and the possibility of a research project.

M270 Net build size (X/Y/Z)

250 x 250 x 185 mm
(9.8 x 9.8 x 7.25 inches)

M280 Net build size (X/Y/Z)

250 x 250 x 306mm
(9.8 x 9.8 x 12 inches)

Click here to request a quote or to contact Morris Technologies.